Sunday, April 15, 2012

Bridge Cranes and Hoist Duty Cycles by Guest Blogger Richard Wehrmeister



This week is The LeCrane Chronicles first Bi-Monthly! I want to start the first one with a highly reputable guest blogger. This month I am pleased to have a post from Richard Wehrmeister. Mr. Wehrmeister is the General Manager of AdvancedOverhead Crane out of Houston Texas. Advanced Overhead Crane has been in busy for many years and is highly respected in the Texas area.

I was scrolling through my LinkedIn groups the other day and I came across this post regarding the duty cycles of electric motors. I had thought this gentleman had brought up a good point. Why won’t bridge crane manufacturers label their cranes with the designed duty cycle? Just because you have a H4 duty bridge motors does not mean your trolley is H4 or the duty cycle of the crane itself an H4 rated crane system. It would be beneficial to know what the crane was designed for regardless of the duty cycle of each individual motor on the crane. The hoisting mechanism is an integral part of the crane. Therefore the duty cycle of the hoist should be the same for the crane correct? You would think so, however this is not always the case. So if the manufacture labeled the crane with an overall duty rating, it would help in the future of the crane with decisions for certain retro-fits, and also an increase of crane usage. Lets hear what Richard had to say about this topic…..

Bridge Crane and Hoist Duty Cycles by author: Richard Wehrmeister


For quite some time I have been an advocate of having all manufacturer’s adding the duty cycle designation to both the hoist and the bridge crane nameplate. My reasoning for this is it allows the bridge crane inspector to analyze the actual duty cycle as operated to the manufacturer’s designed duty cycle. It is not unusual to find equipment that is being used beyond the manufacturers designed duty cycle.

Situations that have come up:
• Equipment was sold for one application and over time the application changed to a more strenuous duty cycle.
• Equipment sold did not meet the application requirements from the start.

To give a couple of examples:
• A number of years back we sold a class C crane with a class H3 hoist. The crane was going to be used in a testing lab. The crane/hoist was only being used 3-4 times a day under capacity load. We were trying to save the customers a few dollars with the H3 hoist. Big mistake, after a couple of years the lab was gone and the crane/hoist became a production crane/hoist. While the crane is working trouble free for the operation the H3 hoist would not hold up. In other words the hoist had on going problems with both the mechanical load brake and the hoist motor brake up until we change out the hoist to a H4 classification.
• Not long ago we were asked for a second opinion involving a hoist. When looking at the hoist from the floor, I remarked that it looked like a brand new hoist with the gear cover off. The customer said that the hoist was a few weeks old. I started to question the customer about the application and I noticed a very large lifting magnet sitting at the other end of the shop and looking back up at the hoist I saw a cord reel. Of course my question to the owner was how often did they use the magnet and did they leave the magnet hanging on the hook during a normal shift. This magnet was about the size of a scrap yard magnet and for those of you familiar, they are very heavy. Once I received my answer I told him that the hoist would not work in this application unless he wanted to rebuild the mechanical load brake every few weeks. He was upset and of course I asked him if he addressed the hoist application with the supplier before ordering the hoist. Note: The lifting magnet far exceeded the maximum weight requirements allowed by the manufacturer for a below the hook device on this particular hoist.

The duty service classifications for hoists are listed In ASME HST Performance Standards. ASME lists five duty classifications H1, H2, H3, H4 and H5.

The duty classifications for bridge cranes are listed In CMAA 70 and 74. CMAA lists six duty classifications A, B, C, D, E and F.

Both ASME and CMAA define each classification according to loading groups and the service conditions as close as possible, taking into account the speed, load and quantity of lifts in a time frame.
Getting back to my first paragraph I believe this is a topic that both ASME and CMAA should address when Regulations and Specifications become due for rewrite. A simple change to a name plate is a very small cost when we’re only talking about adding a couple digits to a name plate however the only way these changes can get done is to get more crane inspectors, manufacturers and associations involved in advocating change. You comments would be appreciated.

_________________________________________________


What do you think about this?
Do you feel that adding the duty rating to the crane will be a benefit for the manufacturer or owner? 
Please share your thoughts on this subject.

_________________________________________________


Calvin LeClair is a representative of Koneranes, A global overhead crane and hoist service company and manufacturer.









Sunday, April 1, 2012

Your Overhead Crane Inspection Report

Often when I go and visit prospects, or new customers I find one thing in common that they are all lacking. Paperwork. It typically doesn’t matter what competitor they are using, they rarely have sufficient paperwork that provides proof of inspections, and or proof of an inspection program that has been performed on a continuing basis. Typically they have several manila folders in a couple different places in their office that has a few service reports and other folders that have crane manuals at best. Then the actual report for the inspection sometimes cannot even be found. If it can, many times it is incomplete, or it is not comprehensive enough to even tell you what the inspector inspected on the crane. A pass or fail for an inspection is just not enough to inform you of your crane issues nor will it keep you compliant. An established paper trail will prevent huge OSHA fines if any accidents were to happen. Companies are fined after major accidents and if they had a paper trail showing they were taking the necessary steps to stay in compliance and keep their facility safe for their workers then the fines would have been nothing near what they received. Let me give you a couple examples of OSHA fines and then I will talk about what is out there on the market for your inspection paperwork.

The first two examples are from an OSHA inspection sweep that was conducted on several companies that had a track record for injured employees. The last one was from a company that had a bad track record of accidents as well but the inspection was conducted because of a related accident.


1. Last year a steel fab shop in Alabama was targeted for an OSHA inspection, not because they had an accident, but because they were targeted for having a higher than average injury and illness rate. They found several serious violations during this walkthrough. Fines totaled $48,510.00. Two of the fines were crane related. They had no inspection records, and someone had welded the hook and no load test was ever conducted.

2. In September of last year Stowe Woodward was fined for similar violations with the same consequences. $49,000 in fines. No frequent crane inspections were ever performed. This is a place that had machinery related fatalities in 1999 and in 2005. I can’t believe after a history like that, a company would not take safety as their number one priority.

3.One of the biggest fines I have ever seen was in Michigan at V&S Detroit Galvanizing in 2009. They were fined a total of $245,000. What struck me was that many were crane related. A $70,000 penalty was charged for moving a rack with a crane over the head of a maintenance employee. Another 70k penalty was charged when the inspector saw the same thing again, only this time they were moving the rack over the employees who were loading the racks below. They were penalized for two additional crane violations, a $7,000 fine for not having an audible warning device on overhead cranes and a $7,000 fine for not performing daily and periodic inspection of overhead cranes.These were all numerous violations that can be found in the state of Michigan’s General Industry Safety Standard, Part 18, Overhead and Gantry Cranes. You can read on more OSHA fines and enforcement information at http://www.osha.gov/dep/index.html.

Go back and look at your inspection paperwork and ask yourself these ten questions..

1. Was it easy to find?
2. Is it up to date?
3. Does it include all your hoisting equipment in your facility?
4. Do you understand the discrepancies?
5. Do you know what your safety items are?
6. Do you know what crane components were inspected?
7. Do you know what crane components were not inspected?
8. Do you know what the priorities are of the discrepancies found?
9. Do you know if any of those items were repaired?
10. Do you know the investment involved to repair those items?

So, how did you do? Are you comfortable with the reports you currently have? If you answered yes to all ten questions then you have an inspection report that far surpasses most in the industry. You are one step ahead and are taking the necessary steps to keep your employees safe and your company in compliance. Great Job!

If you answered “no” to several of these questions then please take a look at what is available to you from Konecranes. The Konecranes MAINMAN inspection report  is comprehensive and not only will you be able to answer yes to all these questions, you will have much more. With the MAINMAN maintenance report, you will have….



1. A complete equipment list of all your overhead cranes.

2. A condition summary where Konecranes will rate your overhead cranes on a scale from zero to a hundred so you know which cranes should be focused on during the repair process.

3. The MAINMAN will take that one step further and will create a Planning Overview. This will list how many components were inspected on each overhead crane or hoist. The report will then list out of those components, how many had safety related issues, and how many had production issues. This is a great report that will help you organize your repairs once the inspection has been completed.

4. A Work Order follows that list all discrepancies by priority and the condition of each component. This is also the sheet that the crane technician will sign off once the repair of the component has been completed. This will be an important tool for you to tell which component has been repaired and which one still needs to be scheduled.

5. In the Quote section you will get an itemized quote that list the cost for labor and parts for each component requiring repair or replacement.

6. Business Review is provided annually or upon request to show you to total annual investment. This is like a report card. This will help gauge our partnership ensuring that your overhead crane investment is being invested in the right way. Expenses are broken down by inspections, repairs, breakdowns, modernizations, new equipment, training, safety deficiencies, and an equipment score for each piece of equipment. This helps optimize the maintenance schedule reducing your overall investment.

7. Last will be the Condition Detail. This section list every component inspected on your crane regardless of the condition. It is color coded for easy glance so you can just go to the components that have an issue. This section also satisfies your requirements from OSHA keeping you in compliance.



All of these pages come bound together so the pages do not get lost and there is no need for various folders. You will get one book for every annual and quarterly inspection. The quarterly inspection booklet is not as in depth as the annual but still will list the vital information. This information will also all be provided on the Konecranes website MyCrane.com.




When choosing your overhead crane inspection company ask about their inspection paperwork. Make sure you know what you are getting for proof of inspection. These reports are vital to keeping you compliant and your employees safe.

So, what kind of inspection paperwork do you have for your overhead cranes? Are you comfortable with what you have? What would you like to see in your inspection paperwork?

Saturday, March 10, 2012

2011 Changes in ASME B.30.2





Last year ASME changed several parts of the B.30.2. Listening to potential clients has led me to believe that many crane companies are either unaware of the changes or are not making their personnel aware of these changes. I would like to think that the crane industry has a high level of integrity, and holds safety of crane operators as a number one priority. When I am out visiting potential customers and introducing Konecranes to them, I am astonished many times by what the competitor considers passing by their crane service provider. Because of this I wanted to make as many people as I could aware of the changes that went into effect in 2011 for the ASME B.30.2. The last time it was revised was in 2005.

Major changes have been added to the Chapter two sections for Inspections, and Testing. This section was revised for easier understanding and interpretation. Let’s just go over these changes. We will review them in order of the sections to keep this as simple as possible. This will also be a refresher for me since it has been awhile since I reviewed these changes.

1.13.3 Basic Controls (Figs 2-1.13.3-1 through 2-1.13.3-4) used during crane operating cycle shall be located within reach of the operator while at the operating station and labeled as to designated function and direction of movement. (The 2005 version simply stated that they had to be labeled.)





 2-1.14-3 This section they changed the terminology. It previously used the term minimum breaking strength. The new terminology is minimum breaking force. (a) The hoisting ropes shall be of a recommended construction for crane service. The total load (rated load plus weight of load block) divided by the number of parts of line shall not exceed 20% of the minimum breaking force of the rope. They also added this to the list of definitions. ASME defines minimum breaking force as the minimum load at which a new and unused wire rope will break when loaded to destruction in direct tension.

Chapter 2-2 Inspection, Testing, and Maintenance has been revised greatly. They re-titled the chapter Inspection and Testing. Under the inspection section they have added a section titled Initial Inspection. Inspection classification and Inspection records was removed and they have now made a section in the beginning of the chapter for General topics of Inspections and Testing. The Maintenance section has been completely removed. They are focusing only on inspections. The same goes for the Rope Inspection section. This section was revised by removing the sections for Rope Maintenance, and Rope Replacement.

 I think this is a good idea because it was too much information in once section and there really needs to be separate sections for inspections and maintenance since they are completely different. This allows for easier understanding and also easier to navigate the regulations. As far as I could tell I did not see any major changes, but just how they worded the same information. I completely agree with what ASME has done. Finding regulations on cranes is hard enough, and then when you have to interpret them as well it can be confusing with all the different information. It always seems that the information is scattered about and it is up to you to figure out what is important. Now it is a little easier because it is more organized in a way that keeps the reader focused on the issue instead of having to continually re-read and search for the right info. There still needs to be some form of training on these changes at least on an annual basis. Ask your crane service company about the overhead crane training that they provide to the technicians and inspectors that come to work on your equipment. You always want to make sure you have a company that invests in their own people. When you get that, you will always get a reliable person working on your equipment.

Wednesday, February 1, 2012

What Do I Need to Know About Crane Operator Training?

There are two key factors you will find when accidents occur in a facility. Either it is caused by complacency or ignorance. There is only one way to reduce this thinking of employees. That is to make safety a value shared by all in the company. Safety must be a culture created by the management of the company. It needs to be believed in by all. If everyone does not buy into then it will not become a culture. When you have a culture of safety committed personnel, ignorance and complacency are no longer factors. The only way to create this culture is to make safety your number one priority above all else including productivity and profitability. If employees believe that the company they work for cares more about their well being than the profit of the company then they will take pride in that and not only will they work safer, they will also watch out for others to ensure the safety for those that work around them .

One key ingredient in creating a safety oriented culture is by providing ongoing safety training. Refreshing employees on safety steps they can take in the facility to make their work day safer will help keep safety in the forefront if their minds daily. Ongoing safety training would include daily and weekly safety talks, monthly safety meetings, and annual training on major safety issues. One major safety issue in your facility is your cranes. Out of all the regulations required by OSHA and ANSI the one that get missed the most would have to be qualifying crane operators. Many companies know to inspect their cranes but they fail to think about the people who are actually operating them. Many will even put an operator on a crane that doesn’t even have any experience operating one. A company will invest in inspections and repairs but will then fail to take that next step to ensure their employees are fully trained in operating the equipment. Not only is this against various codes, and regulations set forth by governing bodies, it is also a great liability.


Barclays California Code of Regulations Section 5006 qualifies an operator by stating, “Only employees authorized by the employer and trained, or known to be qualified, in the safe operation of cranes or hoisting apparatus shall be permitted to operate such equipment.” It is also written in the regulations, “Trainees may be authorized to operate cranes or hoisting apparatus provided they are under the supervision of a qualified operator.”

ASME B.30.2 regulations are what OSHA will reference for crane operator training requirements. ASME requires that cranes be operated by ONLY designated persons, trainees under the direct supervision of a designated person, maintenance and test personnel, when it is necessary in the performance of their duties, and inspectors. Now to be considered qualified by ASME, they required that the crane operator SHALL be required by the employer to pass a practical operating examination. Qualifications shall be limited to the specific type of equipment for which the operator is being examined.

There are many things to consider when providing crane operator training for your employees. For one you need to ensure that it is adequate for the type of equipment you have in your facility. You don’t want to provide a basic 15 minute video on crane safety and a test for a facility that has several bridge cranes. The higher the capacity and more complex the operation the longer you should expect the class to be. Minimally, there are FIVE items you want to discuss and test on in the training class that you’re going to be providing for your employees.

1. Daily Crane and Hoist Inspections

This is the most important part of the class. This rarely gets done in most facilities and typically is because the operators not knowing it is their responsibility. There is actually a lot that goes into a daily check and the larger the crane the more intense the daily check will be. A daily check is vital for safe operations in your facility. This also helps the operator have a better understanding of the equipment they are operating. If it is checked on a daily basis than something that is not ordinarily there will be more easily noticed by the operator and will be picked up potentially preventing an accident.

2. Components of a Crane

An operator will be unable to do an appropriate daily inspection if they do not even know the correct terminology of the crane components. The daily inspection checklist has several crane components listed. Without knowing the correct terminology it could lead to an incorrect inspection results and a crane that could be potentially unsafe. If your operators do know the correct terminology they will be able to not only write it up properly but they will be able to inform the crane vendor of any issues that they are having with the crane that won’t be misinterpreted by the vendor. This will allow a more precise diagnosis and lowering your investment by spending less on time spent troubleshooting.

3. Safe Operation of a Crane

Do your operators know how to stop a load swing if it was to occur in your facility? Do they know what to do if they have a runaway crane? Do all your employees know where the main crane disconnect is located in your facility? These are all important questions and if your training does not incorporate any of these items in your training then you do not have the appropriate training program.

4. Hands On crane operation of a crane in the facility

This part is where they take what they learnt in the class and incorporate into some hands on that the crane operators can try out and get confident while you have a professional crane operator instructor in your facility. If you go back to the OSHA and ASME regulations you will see that the regulations require you to pass a “practical operating exam”. This test will suffice for this part of the regulation.

5. Basic Rigging

The number one reason for a crane accident that is caused by operator error is poor rigging. Anything you do with a crane will require some form of rigging. Your operators MUST know the proper way to rig the load. Regardless if you’re using slings, shackles, spreader bars, or other rigging attachments there is still a proper way to use them. A basic rigging instruction will help them be more efficient and safe operators.

In 2011 the Konecranes Training Institute conducted a study that analyzed crane accidents and the fatalities from those accidents. The information from this study was taken from 10 years of public OSHA Inspection Reports. The findings were very alarming if you are a crane operator. This study found that 58% of people injured or killed were crane operators. 37% of crane incidents a person were crushed by a load. This was the result of load drops, or load swings. You can see how serious these findings are. If there is a crane accident, there is a great chance the crane operator will be hurt or killed. This study analyzed that 70% of these accidents were preventable with proper operator safety training.

In closing, it is the crane operators’ responsibility to ensure that they are operating the crane safely; however it is the employer’s responsibility to train their employees with the knowledge to operate the cranes in a safe and efficient manner. When you’re incorporating crane operator training into your safety program, ensure that you have the appropriate material for your employees. Look into a training program that will discuss your equipment, and all five important items to discuss during training.





Saturday, January 7, 2012

Mechanical Load Brake Operation and Inspection

There are many misconceptions of mechanical load brakes on lifting equipment. I have heard from many customers that they think the load brake is designed to hold the load during normal hoisting operation. This is not completely correct. I have also been told from customers that load brakes are required to be inspected on an annual inspection. This too is incorrect. There are two basic reasons hoist have load brakes. The mechanical load brake has to control the speeds when lowering the load, and has to be able to hold the load when the motor is not running. The load brake operates very similar to a nut and bolt. Let me introduce you to load brakes and give you a brief description of how the load brake works and see if I can help you understand the load brake functionality and inspection frequency for them.

During the hoisting mode the load brake is unlocked and freewheeling. The purpose of a “load brake in a hoist application is to keep the suspended load from falling without power to the hoist and independent of the motor brake.” When the load is being lowered the clutch locks stopping the load brake system from rotating. As soon as the motor stops driving the load, or the load travels faster than the motor then pressure will be applied to the friction disc. If the electric motor brake fails the load brake will completely lock to hold the load. You will also be able to lower the load to the ground. This is done by the self-adjusting clutch. The brake will tighten slowing the load, and the load brake loosens if it is going too slow. This is a rapid succession that keeps the load controlled. If you hear a clicking sound when the load is being raised, this is the pawl hitting the ratchet teeth. You should not be hearing this noise if the load brake is adjusted properly.
Let me explain my statement when I said that it is not completely true that the load brake is designed to hold the load during normal hoisting operation. The load brake actually works together with the hoisting brake. The Weston style load brake (pawl & ratchet) holds approximately 25 to 30% of the load being picked up. The holding brake does the bulk of the work. This is why it is vital to have your holding brake inspected frequently so the load brake does not end up doing all the work causing it to wear faster.

The other misconception is that the load brake requires an annual inspection. This is incorrect. All load brakes are self-adjusting and minimum maintenance is required. There is however cases the load brake require an inspection. If you hear clicking sounds coming from your load brake then an adjustment is required and can be done externally with the adjustment nut. However if it has been several years since the gear case has been opened and inspected than it is a good idea to open the gear case to inspect the brake linings and other components. Lubrication to the load brake is also highly important. Every time pressure is applied to the load brake the heat is dissipated by the lubricant. If not enough lubrication is in the gear case than the brake will over heat destroying the brake liners. In some cases forced cooling is required for heavy loads. The lubrication should either be changed out annually or lab tested. The viscosity of the lubricant is vital to control the operating temperature of the gear case. Old or dirty oil will change the original viscosity of the oil. Like anything oil too has a shelf life even if it is clean. If the viscosity or oil level is too high or too low it can cause overheating, excessive power consumption, and foaming. It is recommended to inspect the gear case and load brake every 4 years or per your OEM. Each OEM will have a different recommendation so check with your owner’s manual for inspection frequency. It is recommended as well to test the load brake annually at 25% of the load capacity. Not following your OEM recommendations could result to premature wear of your load brake.

I hope this small amount of information has been helpful to you. The inspection process although not annually is very important in safety of your crane and in extending the life of it. It may be a costly investment but it is vital in preserving the life of your crane and the safety of those that work under it.

Thursday, December 1, 2011

How Much Can I Pick Up With My Crane?


As a certified crane operator instructor I have given many classes and I am always asked questions that become repetitive. I think those are the questions that need to be shared the most. Like, What is wrong with side pulling?, or Why do I have to inspect my crane so often? These are important questions and definitely should not go unanswered. There is one question that I get more than any other. I get this question in my training classes, I got it when I was a crane technician, and I get it as a consultant to my customers. How much can I pick up with my crane? Every time I am asked this I answer it the same way, You can lift whatever the lowest capacity rating you have on your crane system. Once I state this, I always get the counter question of, I thought there is a safety factor built into my crane? Well, yes there is but that don’t mean your crane was designed for lifting your rated capacity plus the safety factor percentage. In this post I will try to explain what the correct answer is, and then I will do my best to explain to you this safety factor.

The regulations set forth by OSHA clearly says that you are not to pick up more than the rated capacity of the crane. OSHA 1910.179 N states that The crane shall not be loaded beyond its rated load except for test purposes as provided in paragraph (k) of this section. Not only can you not exceed the rated capacity of the crane, but you also have to factor in the lowest rated capacity of the device your using to lift with. If you have a below the hook device you have to subtract the weight of the device from the rated capacity of the crane. Then if the rated capacity of the device is smaller than the rated capacity of the bridge or hoist then you cannot exceed the capacity of the device.

You should never pick more than the rated capacity unless it is for a load test which will be conducted at or near 125% of the rated load. So many factors go into the design of a crane that you would have to look at the safety factor of all your components. You would have to look at the wire rope, the motors, bearings, sheaves, drums, wheels, rails, hoisting speeds, and beam and steel sizes.

Now when you try to figure out what is your cranes safety factor, you have to be careful as to whether your crane manufacturer built the crane based on CMAA standards or FEM standards. So it is important to know what the difference is between the two standards. CMAA is the Crane Manufacturers Association of America and FEM is Federal European De La Manutention. This is the standards for design and manufacturing internationally of overhead traveling cranes. FEM specifications are written based on the input from the World’s largest crane companies. Then of the CMAA specifications are written based on the input from the largest American crane companies. FEM will separate each main part of the crane (hoist, trolley, and bridge). However CMAA groups them together as one structure and machinery. I think the problem you can have with this is that with FEM you can get an under and over designing of certain components because it does not always take into account the entire crane system as CMAA does. CMAA safety factor for the wire rope is 5:1 for standard cranes, and 8:1 for molted metal cranes. However, FEM safety factor for the wire rope of 3.6:1 and up to 9:1 depending on the crane group the crane is classified in. There are 6 classes of cranes for FEM and for CMAA. These different classifications were designed to allow for the most economical crane to be specified.

FEM         1Bm    1Am    2m    3m    4m    5m
CMAA      A        B         C      D      E      F
These classifications are based on the usage of the crane. They are similar to each other but different enough that it can put your cranes in different classifications.

FEM    Life in Hours
1Bm     0-1,600hrs
1Am    1,600-3,200hrs
2m       3,200-6,300hrs
3m       6,300-12,500hrs
4m       12,500-25,000hrs
5m       25,000-50,000hrs


CMAA   Life in Hours
A             0-1,250hrs
B             1,250-2,500hrs
C             2,500-5,000hrs
D             5,000-10,000hrs
E             10,000-20,000hrs
F             20,000-40,000hrs



Typically with the FEM standards you are getting a heavier duty hoist than with the CMAA standards. FEM also factors their calculations using the long ton while CMAA goes by the short ton. The difference is 220lbs per ton. This does not seem like a lot but when you are comparing a heavier capacity hoist it is a drastic difference. For example if your crane is a 30 ton hoist, CMAA standards will build the crane for 30 tons. Likewise that same hoist by FEM standards will be built for an additional 6,138lbs.

You also have to consider the deflection of your bridge beam when factoring in what your crane can pick up. When a load test is conducted on your crane deflections are measured. CMAA has an allowable deflection of live load tolerance. However FEM has no such rule. If we go by CMAA standards the standard allowable deflection is .1125% of the span of the bridge. A good rule to go by that I always used as a technician to find an acceptable tolerance is, Jib cranes tolerance is the span/150 or 450 depending upon the span. A single girder crane has an allowable tolerance of the span/603 and double girder cranes have a tolerance of the span/888. These tolerances are based on 100% of the rated capacity.

In the end the crane operator is the one who is responsible for the lift. It is the operator’s responsibility to know what the capacity of the crane and any lifting devices. If the operator has any doubts to the safety of the lift then they should not lift the load. Anytime that the lift is going to be at near capacity it is a good practice to test the brakes. The operator tests the brakes by raising the load only a few inches off of the ground and applying the brakes. There should be no drift in the hoist motion when the operator is not raising or lowering the load. This is an excellent safety measurement and should be used.

Many factors are taken into account when considering the safety factor for your crane. There are so many different parameters that get you to your true safety factor that you would have to re-engineer the entire crane to figure out what it truly is. Once true stress is calculated at its maximum on all load bearing components and the usage of the crane is calculated then the true safety factor can be calculated. The standards are guidelines to help with the design of the crane. However, they also give limits and requirements for most vital crane components. Although cranes may be built according to CMAA standards, all electric hoists are designed and rated according to FEM standards. These standards are in place to make the operator and those working around the crane safe. Be safe and never exceed the capacity of the crane. Ensure your crane operator has been properly trained and your equipment is being inspected as well as maintained with a through preventive maintenance program.

Tuesday, November 1, 2011

New OSHA Standards on Slings

New OSHA standards have improved the regulations for slings. This new revision to the regulations requires that all slings regardless of the material require permanently affixed identification tags. This revision is part of the Standards Improvement Project Phase III. This project is to improve and streamline OSHA Standards. There are so many standards out there that the rules are so confusing, or duplicate what has already been said somewhere else and even written a different way causing much inconsistency. Many regulations are even outdated and should not apply in today’s world. This improvement project will help employers to understand the regulations better. Through better understanding employers will work safer, and be in compliance. After reading the revised regulations I think they did an excellent job at rewording much of the regulations but they did a poor job at duplicating the same message in every section. Every sections still tells you that you have to have a capacity label on anything. I would think it would be easier to read if they had a section for all lifting equipment that stated what is required for all devices regardless of what they are made of. This would save a lot of time reading the same thing over and over again every time you come to a different section.


There are several new changes to sling capacity labels and shackle markings that took effect on July 8th 2011. Previously many slings had a load capacity chart if it was a synthetic sling, or if it was a wire rope sling it had no rated capacity at all.



The new major changes are as follows….

• Remove load capacity tables for slings that were in the previous OSHA standards


• Sling Markings- Employers now must use only slings with permanently affixed identification markings that show the maximum load capacity for each sling


• Shackle Markings- Required to have rated capacity label on shackle






Much of the original regulations have stayed the same but they have also been reworded so it is easier to understand. I have the entire set of regulations that have been revised. I separated them based on what the regulations were about and compiled them together for easier reading.






• Employers must not load a sling in excess of its recommended safe working load as prescribed by the sling manufacturer on the identification markings permanently affixed to the sling.


• Employers must not use slings without affixed and legible identification markings.



Alloy chain slings also have their own specific regulations…



• Employers must permanently remove an alloy steel-chain slings from service if it is heated above 1000 degrees F. When exposed to service temperatures in excess of 600 degrees F, employers must reduce the maximum working-load limits permitted by the chain manufacturer in accordance with the chain or sling manufacturer’s recommendations.


• Effect of wear. If the chain size at any point of the link is less than that stated in Table N–184–1, the employer must remove the chain from service.


• Employers must ensure that chain and chain slings:


• Have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one;


• Not be loaded in excess of its recommended safe working load as prescribed on the identification markings by the manufacturer; and


• Not be used without affixed and legible identification markings.


• Employers must note interlink wear, not accompanied by stretch in excess of 5 percent, and remove the chain from service when maximum allowable wear at any point of link, as indicated in Table G–2 in § 1915.118, has been reached.





Wire rope slings have the most significant change in the entire revisal. Prior to this wire rope slings did not require a capacity label. Here are the revised regulations for wire rope slings.



• Wire-rope slings—(1) Sling use. Employers must use only wire-rope slings that have permanently affixed and legible identification markings as prescribed by the manufacturer, and that indicate the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one.


• Employers must ensure that wire rope and wire-rope slings:


• Have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one;


• Not be loaded in excess of its recommended safe working load as prescribed on the identification markings by the manufacturer; and


• Not be used without affixed and legible identification markings.


• When U-bolt wire rope clips are used to form eyes, employers must use Table G–1 in § 1915.118 to determine the number and spacing of clips.


• Employers must apply the U-bolt so that the ‘‘U’’ section is in contact with the dead end of the rope.







You never see natural or synthetic fiber-rope slings used today in the crane industry. There still are regulations for them since you may see them used in manual lift with shackle blocks.



• Natural and synthetic fiber-rope slings— Sling use. Employers must use natural and synthetic fiber-rope slings that have permanently affixed and legible identification markings stating the rated capacity for the type(s) of hitch(es) used and the angle upon which it is based, type of fiber material, and the number of legs if more than one.

§ 1915.112 Ropes, chains, and slings.



• Manila rope and manila-rope slings. Employers must ensure that manila rope and manila-rope slings: Have permanently affixed and legible identification markings as


prescribed by the manufacturer that indicate the recommended safe working

load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one; Not be loaded in excess of its recommended safe working load as prescribed on the identification markings by the manufacturer; and Not be used without affixed and legible identification markings as required by paragraph (a)(1) of this section.





Shackles and hooks get overlooked more than any other lifting device or rigging attachment. Shackles and hooks still have strict regulations in place to keep workers safe and prevent any accidents. Below is the rewording of the up to date regulations 1915.13 Shackles and Hooks.



• Shackles. Employers must ensure that shackles:


• Have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load;


• Not be loaded in excess of its recommended safe working load as prescribed on the identification markings by the manufacturer; and


• Not be used without affixed and legible identification markings.





The last updates the regulations received were for the general rigging equipment for material handling. This is for any piece of rigging to ensure that all below the hook devices and any material handling equipment not covered in the previous regulations will be covered here in this last set of regulations. The regulation below is the 1926.251 rigging equipment for material handling.



• Employers must ensure that rigging equipment:


• Has permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load;


• Not be loaded in excess of its recommended safe working load as prescribed on the identification markings by the manufacturer; and


• Not be used without affixed, legible identification markings.


• Employers must not use alloy steel-chain slings with loads in excess of the rated capacities (i.e., working load limits) indicated on the sling by permanently affixed and legible identification markings prescribed by the manufacturer.

• Employers must not use improved plow-steel wire rope and wire-rope slings with loads in excess of the rated capacities (i.e., working load limits) indicated on the sling by permanently affixed and legible identification markings prescribed by the manufacturer.


• Wire rope slings shall have permanently affixed, legible identification markings stating size, rated capacity for the type(s) of hitch(es) used and the angle upon which it is based, and the number of legs if more than one.


• Employers must not use natural and synthetic-fiber rope slings with loads in excess of the rated capacities (i.e., working load limits) indicated on the sling by permanently affixed and legible identification markings prescribed by the manufacturer.


• Employers must use natural- and synthetic-fiber rope slings that have permanently affixed and legible identification markings that state the rated capacity for the type(s) of hitch(es) used and the angle upon which it is based, type of fiber material, and the number of legs if more than one.


• Employers must not use shackle with loads in excess of the rated capacities (i.e., working load limits) indicated on the shackle by permanently affixed and legible identification markings prescribed by the manufacturer.



Below the hook devices are the most overlooked part of any inspection on a crane, especially when they are not stored on the crane itself. What you have read are all of the new regulations and the revised wording of the OSHA regulations on slings. It is very important to understand what codes your equipment fall under. If you are unsure contact your service provider and they will go over with you any regulations that you would like clarification on.



It is vital to stay up to date with the changes that occur every year. Keeping up to date is very hard and can be time consuming especially when you have other task that are not crane related. This is why it is beneficial for any company to have a inspection outsourced to professionals who inspect cranes and below the hook devices on a daily basis. When looking for a crane company to service your cranes, pick one that has an extensive training program for their technicians and inspectors so that you can be assured that your getting an accurate inspection that will include covering any new codes that have come out for the new year.